1. Materials needed - contact paper in clear (I found this roll at the dollar store), scissor, Xacto knife, Armour etching cream, glass jar, brush, healing mat, tape, gloves and my print out I created from my computer. I created Joy and the letter "B & L"2. I cut the contact paper to 11x11 and tape to healing mat. Next I took the letter "B" and trim around leaving about 1 1/2 inches around the letter and turn upside down and tape on top of contact paper.
3. With a sharp Xacto knife I follow the outline of the letter and I took my time with this process because I wanted the lines and curves as straight as possible.
4. Once cut remove the copy letter and see how the contact paper is cut. I removed the contact paper cut "B" and set aside.
5. I'm left with the outline of the letter "B", this is the template that will adhere to the glass. I removed the outline from the healing mat and set aside.
6. Tape the "B" cut out of contact paper on the healing mat.
7. Then I place the copy letter back on the contact paper and tape to healing mat.
8. I carefully cut out the bubbles on the "B"9. Nice cut out. : )
10. Remove the bubbles and set aside.
11. Some of you my think this is my template I will be using on my jar, but it's NOT! This "B" I do not use and I save it for another project. I bet some of you are already thinking about how to use it. LOL! I am not going to tell, but there is a follow up project. : )
12. Remember in Pic 5, I set aside the outline of the "B" well I adhered to the glass. I had to work with it a little so everything lines up correctly. I did make a cut in the bottom to make it fit smooth.
13. I placed the copy of the letter over the glass so I know where to add the bubbles.
14. The outline in pic 5 and the bubbles from pic 10 are in place.
15. With a pen I made sure all the edges are smooth and adhered to the glass
16. This is what the contact paper looks like. Not too bad.
To get the glass to not roll I added my scissor to the bottom. See the pink on the bottom right on Pic 18? Works great!
17. I put on my gloves and stirred my etching cream. I made sure there is only etching cream on one side of the brush. When applying the cream I started from the top and add a thick coat. Not thin where is see through, but a bit heavy. ***Read the direction on your bottle for every brand is different. ***
18. Here is what it looks like when I am done applying the cream. I waited 2 minutes and rinse off with cool water and pat dry and let sit for a couple of minutes before removing the contact paper.
19. Do you see the edges have a white line on the top left side? I am going to remove that. Didn't look right to me, so this is what I came up with.
20. Gently, using my Xacto knife I removed the white line on the edge. It came right off.
I just love how this came out and I have other projects to show you as well. Thanks for stopping by and remember it's the season for being crafty and the season for handmade! I Love to hear from you so drop me a line and if you make this project and send me pics. : )